Phoenix Contact 1153079, Руководство по установке и запуску

Страница: 20 / 54

FL MGUARD 1000 product family
20 / 52
PHOENIX CONTACT 108413_en_06
2.5.3 Active network services (device as client)
The following network services are activated by default on the device (as client).
Table 2
- 8 Default setting : active services (as client)
Service Active via Configuration (default)
DHCP client Net zone 1 (XF1) Sends DHCP requests to available DHCP
servers in its network via UDP port 67.
DNS client Net zone 1 (XF1)
(Net zone 2 [XF2] applies
the settings of net zone 1)
Sends DNS requests to available DNS
servers via UDP port 53.
Default setting:
The address of a DNS server can be as
-
signed per DHCP if there is a DHCP
server in the network.
If no address has been assigned via
DHCP, the root name server preset in the
device is used.
NTP client Net zone 1 (XF1)
Net zone 2 (XF2) Sends NTP requests to available NTP
servers via UDP port 123.
Default setting:
The following addresses (host names) of
the NTP server have been preset:
– 0.pool.ntp.org
– 1.pool.ntp.org
– 2.pool.ntp.org
– 3.pool.ntp.org