Philips VARILITE VLX3, Руководство по обслуживанию

Страница: 66 / 130

VARI
❋
LITE - VLX3 LED W
ASH
L
UMINAIRE
S
ERVICE
M
ANUAL
4 8 0 2 . 9 7 0 3 . 0 0 1 0 0
Pan Belt Replacement
Tools:
• #2 Phillips screwdriver
WARNING: Ensure that power is completely removed (disconnected) from luminaire before
attempting any work.
To remove pan motor assembly:
Step 1. Remove power from luminaire and allow unit to completely cool.
Step 2. Remove power supply following procedure described in “Low Voltage Supply (LVS)/LED
Power Supply Replacement” chapter on page 22 .
CAUTION: In next step, do not set luminaire where the lenses come in contact with the work surface.
Step 3. Carefully, rotate luminaire to access bottom of enclosure.
Step 4. Remove six 1/4-20 x 1/2" PFZ screws and remove bottom plate.
Step 5. Remove pan motor following procedure described in “Pan Motor Assembly Replacement”
chapter on page 47 .
Step 6. As shown in Figure 2-29 , at wire tray, remove four 8-32 x 1/4" PPZ SEMS screws and
remove tray.
Figure 2-29: Wire Tray Removal
Step 7. Disconnect all wiring from inside enclosure.
Note:
Components removed and
drawing exploded for clarity.
Enclosure Assembly
Wire Tray
8-32 x 1/4" PPZ
SEMS Screw (x4)