Philips VARILITE VLX3, Руководство по обслуживанию

Страница: 40 / 130

VARI
❋
LITE - VLX3 LED W
ASH
L
UMINAIRE
S
ERVICE
M
ANUAL
2 2 0 2 . 9 7 0 3 . 0 0 1 0 0
Low Voltage Supply (LVS)/LED Power Supply
Replacement
Tools:
• #2 Phillips screwdriver
WARNING: Ensure that power is completely removed (disconnected) from luminaire before
attempting any work.
To remove LVS / LED power supply assembly:
Step 1. Remove power from luminaire and allow unit to completely cool.
Step 2. At upper enclosure, remove display side handle by removing four 10-32 x 5/8" PPB screws.
as shown in Figure 2-4 .
Figure 2-4: VLX3 Wash Luminaire Upper Enclosure
Step 3. Remove the inlet exhaust screen.
Step 4. Remove two 10-32 x 9/16" PFB screws securing power supply.
Step 5. Slide power supply out of enclosure. Note, the power supply is connected to wiring. Do not
pull all the way out until wiring is disconnected.
Display Side Handle
Upper Enclosure
CAUTION:
Remove power and
allow fixture to cool.
10-32 x 5/8" PPB Screws (x4)