Philips VARILITE VLX3, Руководство по обслуживанию

Страница: 63 / 130

M
AINTENANCE
P
ROCEDURES
: W
IRELESS
DMX I
NTERCONNECT
PCB R
EPLACEMENT
0 2 . 9 7 0 3 . 0 0 1 0 0 45
2
Wireless DMX Interconnect PCB Replacement
Tools:
• #2 Phillips screwdriver
WARNING: Ensure that power is completely removed (disconnected) from luminaire before
attempting any work.
To remove wireless DMX interconnect PCB assembly:
Step 1. Remove power from luminaire and allow unit to completely cool.
Step 2. Remove power supply following procedure described in “Low Voltage Supply (LVS)/LED
Power Supply Replacement” chapter on page 22 .
CAUTION: In next step, do not set luminaire where the lenses come in contact with the work surface.
Step 3. Carefully, rotate luminaire to access bottom of enclosure.
Step 4. Remove six 1/4-20 x 1/2" PFZ screws and remove Bottom Plate
Step 5. At wireless DMX interconnect PCB, disconnect wiring.
Step 6. As illustrated in Figure 2-26 , at wireless DMX interconnect PCB, remove two 6-32 x 3/16"
PPZ screws and remove wireless DMX interconnect PCB.
Figure 2-26: Wireless DMX Interconnect PCB Removal
Step 7. Reassemble following steps in reverse order.
Step 8. Power luminaire and test.
Note:
Components removed and
drawing exploded for clarity.
Wireless DMX Interconnect PCB
6-32 x 3/16" PPZ Screws (x2)
Enclosure Assembly