English
20
H. Connecting the audio
cables
AU D IO
O U T
S-V ID E O
IN
V ID E O IN
TV
DIGITAL IN
This connection enables you to listen to
the sound.
Option 1: Using an Audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use the supplied audio cables (red/white)
to connect the
AUDIO OUT (L/R)
jacks to these devices with the same
input jacks.
Step 1: Basic Recorder Connections
(continued)
Option 2: Using a Coaxial cable
You can connect the recorder to an AV
amplifi er/receiver in order to enjoy
multichannel surround sound.
Use a coaxial cable (not supplied) to
connect the
COAXIAL OUT
jack to
the digital input on the AV amplifi er/
receiver with a digital multi-channel
sound decoder.
Before you start operating, set the audio
settings accordingly (see “Setup Menu
Options - AUDIO settings”.)
If the AUDIO settings do not match your
amplifi er’s capabilities, the amplifi er may
produce a strong, distorted sound or no
sound at all.
Helpful Hint:
– Do not connect your TV’s audio output
jacks to the AUDIO IN L/R jacks on this
recorder, this may cause unwanted
noise.
I. Connecting the power
cords
After everything is connected
properly, plug in the AC power
cords of the main set, subwoofer
and TV to the power outlet.
Never make or change any
connection with the power switched
on.
TIPS:
Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
Option 1
Option 2
pg001-pg080_RTH718_eng_98.indd 20
pg001-pg080_RTH718_eng_98.indd 20
2006-10-20 10:41:50 AM
2006-10-20 10:41:50 AM
