Phcbi MPR-722 Series, Руководство по эксплуатации

Страница: 30 / 44

30
ROUTINE MAINTENANCE
Cleaning of exterior, interior, and accessories
Use a dry cloth to wipe down the outside and inside of the unit and all accessories. If the outside panels
are dirty, clean them with a diluted neutral dish-washing detergent.
Wipe off condensation from the exterior of the cabinet or glass with a dry, soft cloth.
 Using an undiluted solution of detergent may cause the unit’s plastic areas to crack. Follow the
directions on the detergent for details of dilution.
 After the wiping the cabinet or accessories with a diluted detergent, be absolutely sure to wipe the
surfaces with a cloth dipped in clean water to remove traces of the detergent. After this, be absolutely
sure to wipe the surfaces with a dry cloth.
<Important>
Never pour water onto or into the unit. This may cause electric shock or failure.
Do not use a brush, an acid, a thinner, laundry soap, a powder detergent, or boiling water for cleaning.
These may cause damage to painted surfaces or cause perishing of plastic and rubber components.
Moreover, do not wipe plastic and rubber components with a volatile material.
Cleaning of evaporating tray
This unit is provided with the evaporating tray on the back. The defrost water is collected in this tray and
evaporated automatically. Clean the evaporating tray once a month. The cleaning procedure is as follows.
1.
Remove four screws fixing the mounting bracket for the
evaporating tray, and then remove the bracket and the
evaporating tray.
2.
Dispose the water in the evaporating tray.
3.
Wash the evaporating tray and then wipe with a dry
cloth.
4.
Fix the evaporating tray with the mounting bracket and
four screws.
Evaporating
tray
Mounting
bracket