11
REFRIGERATOR COMPONENTS
1. Front cover:
Open this cover when using the remote alarm terminal or replacing the glow starter [page
13]. To open the cover, pull the lower portion forward.
2.
Control panel:
The chamber temperature and other alarms/functions can be set through the keys on
the control panel. The running status can be checked by the temperature display and indicators [page
12].
3.
Light switch:
This is a switch to turn on or off the fluorescent lamp.
4.
Space for temperature recorder:
A temperature recorder (optional) can be mounted here so that the
chamber temperature can be recorded automatically [page 39].
Contact our sales representative or agent to arrange the installation.
5.
Glass window:
The condensation may be found on the glass under high temperature and humidity
condition. Wipe off the condensation with a soft dry cloth.
6. Keyhole:
Turn the key counterclockwise through 180 degree to securely lock the door.
7.
Dew collector:
The condensation on the glass window is accumulated in this dew collector. Wipe off
the water from the dew collector with a cloth.
8.
Leveling foot:
These are screw bolts used to install and fix the unit. Adjust the height of the levelling
feet by turning the screw bolts until the two front casters are away from the floor
[page 15].
9.
Shelf (MPR-722):
The location is selectable. The allowable load is 50 kg per shelf.
Never store items on the bottom of the chamber. Always store items in the drawers.
Drawer (MPR-722R):
The allowable load is 40 kg per drawer.
<Important>
Do not pull out plural drawers at the same time when putting in and out of the stored items. If you store
heavy objects, it may cause injury due to the fall of the unit.
10.
Access port:
This port is used to pass the sensor or cable of measuring equipment, or the sensor of
a temperature recorder (optional) to the chamber.
Replace the insulation and the rubber caps when the access port is not in use. Improper replacement
may cause an increase in chamber temperature or condensation around the access port.
11. Air exhaust vent:
This is an air exhaust vent to circulating the air in the refrigerator chamber. Do not
block this vent.
Blocking this vent may cause unstable chamber temperature.
Arrange the stored items not to be subjected to the cold air from this vent to avoid freezing.
12.
Air intake vent:
This is an air intake vent to circulating the air in the chamber. Do not block this vent.
Blocking this vent may cause unstable chamber temperature.
Do not insert fingers or similar articles into this vent.
13. Door switch:
This switch detects the door open/close status. The door check indicator is lit when the
door is opened.
14. Fixture:
Use the fixtures and secure the unit to a wall with a strong rope or chain [page 15].
15. Evaporating tray:
Defrost water from the evaporator accumulates on the tray and evaporates into the
atmosphere.
16. Power switch (also functions as a circuit breaker):
This is the power switch of the unit. (ON=”
l
”,
OFF=”
○
”)
The round button under the power switch is a test button for the circuit breaker. After pressing this
button, the power to the unit is disconnected.
Содержание MPR-722 Series
Страница 10: ...10 REFRIGERATOR COMPONENTS Main body MPR 722 Back side 14 15 16 1 2 3 4 5 7 8 9 10 11 12 13 6 ...
Страница 43: ......
