Phcbi MPR-722 Series, Руководство по эксплуатации

Страница: 21 / 44

21
SETTING THE TEMPERATURE DISPLAY MODE
The display mode of chamber temperature is selectable; integer display or decimal display. Select the
display mode as required.
 Setting range of temperature display mode: integer mode (display: -50 to 50) or
decimal display (display:-19.9 to 50.0)
 Initial setting (factory setting): integer display mode
 In the case of decimal display mode, -19.9 is always displayed when the chamber temperature is lower
than -19.9 o C.
Example: Change the mode to decimal display from integer display (factory setting)
Operation Key operated Display after operation
1
----- -----
The current chamber temperature is
displayed.
2
Press the up arrow key for 5
seconds.
F00 is displayed and the first digit
blinks.
3 Press the up arrow key 8 times.
The display is changed to F08 from
F00.
4 Press the scroll key once.
The second digit blinks.
5 Press the up arrow key once.
The display is changed to F18 from
F08.
6 Press the “set” key. SET
The current setting (000) is displayed
and the first digit blinks.
7
Press the up arrow key and scroll
the figure to 1.
The display is changed to 001 from
000.
8 Press the “set” key. SET
The setting is memorized and the
current chamber temperature is
displayed with decimal mode.
 The unit will return from setting mode to temperature display mode automatically after 90 seconds if no
key is operated (auto-return function). In this case, the setting is not changed.
Note:
Set the figure to 000 in above procedure 7 when selecting the integer display mode.