PHACON SINUS TRAINER, Руководство пользователя

Страница: 23 / 32

23
CLEANING
NOTE:
• Make sure the Patient has been removed from the skull and the skull has been removed from the tray.
• Thoroughly remove all debris from the Patient lever to make sure the lever has complete freedom of
movement. Failure to comply may prevent the proper installation of the temporal bone insert into the
bone cavity during set up.
1. Remove loose debris from the surface of the skull, including the mounting plate, cables, and suction
port using an external vacuum source.
2. Carefully remove all debris from the risk structure contact pins of the skull using a dry brush and an
external vacuum source.
3. While articulating the Patient lever, remove all debris from around the lever using a dry brush and an
external vacuum source. Make sure the lever has complete freedom of movement.
4. Remove all debris from the spillways within the skull using a dry brush and an external vacuum
source. Make sure the spillways are clear to allow water to low freely during the use of irrigation.
5. Wipe all the surfaces of the skull, including the contact pins, insert lever, and spillways with a soft
cloth wet with water.
1. Remove loose debris from the exterior of the tray using an external vacuum source.
2. While articulating the ball-joint mount and each lever, remove all debris from the ball-joint mount
using a dry brush and an external vacuum source. Make sure the ball-joint mount and levers have com-
plete freedom of movement.
3. Wipe all the surfaces of the tray, including the ball-joint mount and each lever, with a soft cloth wet
with water.
1. Wipe all the trainer accessories, including the pointer, trackers, cables and electrical bur adapter
with a soft cloth wet with water.
2. After all the system components and accessories have been cleaned properly, see the Storage and
Handling section.
CLEAN THE SKULL HOLDER WITH TRAY
CLEAN THE TRAINER ACCESSORIES
CLEAN THE SKULL