Mixing Pump RITMO XL FU 230V Overview – Operation
Work on troubleshooting
40
2019-12-11
37.2 Fault displays
The following installation indicates faults:
1
4
Fig. 67: Fault displays
Pos.
Light signal
Description
1
Red pilot lamp Lights up on motor protection switch
fault.
Check motor protection switch
2
Yellow pilot
lamp
Lights up if the direction of rotation is
wrong.
37.3 Faults
The following chapter describes possible causes for faults
and the activities carried out for their rectification.
In case faults occur frequently, shorten the maintenance
intervals in accordance with the actual load.
In the event of faults that cannot be rectified by means of
the following notes, kindly contact the dealer.
37.4 Safety
Protective gear
The following protective equipment has to be worn for all
maintenance work:
Protective clothing.
Protective goggles, protective gloves, safety shoes, ear
protection.
Personnel
The work for rectification of faults described here can be
carried out by the operator, unless marked otherwise.
Some works must be carried out only by specially trained
skilled personnel or exclusively by the manufacturer.
Information on this can be found in the description of the
individual faults.
Work on the electrical system must, in principle, be carried
out only by electricians.
