Pfeiffer Vacuum OnTool Booster 150, Руководство по эксплуатации

Страница: 18 / 24

18
If ‘’F3’’ is heated above 300°C, toxic vapours
which can harm the respiratory tract are
emitted. Do not allow ‘’F3’’ to come into contact
with tobacco products (danger of poisoning
when ignited). The precautions necessary in
the handling of chemicals must be observed.
WARNING
Before first-time starting and after a lubricant
change, the amount of lubricant is approximate-
ly 24ml.
The filling level range shown in the illustration
("min./max.") should never be exceeded nor
undershot.
Please contact your local Pfeiffer Vacuum Service for all
other maintenance and service work.
CAUTION
Filling in the lubricant
Only fill the lubricant reservoirs of the pump in
the horizontal position. Do not fill when the
pump is running and not in evacuated condition.
➡
Unscrew both lubricant filler screws 31, taking care with
the sealing.
➡
Slowly fill in 24 ml of the accompanying lubricant into each
lubricant reservoir.
➡
Screw back in lubricant filler screws 31 with the sealing.
➡
During operations or at pump still stand check the
lubricant level on both sight glasses; the permissible level
is shown in the illustration.
➡
In non-stop operations check the lubricant monthly, on
both sight glasses 9 after each switch-on.
CAUTION
5
ml m
l
4
3
2
1
V 10 ml
max.
min.
Filling In And Checking The Lubricant
9 Sight glass
31 Lubricant filler screw
31
9
Remove drops of lubricant in the working envi-
ronment immediately using either a rag or some
suitable cleaning agent.
Disposal of used lubricant is subject to the rele-
vant local regulations.
☞
PLEASE NOTE
☞
PLEASE NOTE