Pfeiffer Vacuum OnTool Booster 150, Руководство по эксплуатации

Страница: 8 / 24

8
3.5. Connecting The Vacuum Side
As standard, the pump is equipped with an inlet opening poin-
ting vertically up for fitting a vacuum flange (DN 50 ISO-KF) or
a corrugated hose. Upon delivery, this opening has been
blanked off with a blank flange including a centering ring, for
the purpose of the protecting the inside of the pump.
The vacuum side of the pump must not be
flanged directly to the vacuum chamber; it must
be flanged via a bellows.
Never suspend the pump on the vacuum flange,
always set up on the standing surface or screw
down.
➡
Loosen the screws from the claws and disassemble the
blank flange.
➡
Fit the desired component part directly to the inlet opening
using claws; note the centering ring.
Shifting the inlet opening
Depending on the installation situation, the inlet opening may
be shifted to the side or the bottom.
During assembly of component parts do not lay
the pump on the side or the back
➡
Disassemble the blank flange (flange cover) at the desired
inlet opening.
CAUTION
CAUTION
Filling In The Lubricant
Fill only when the pump is in the horizontal posi-
tion. Do not fill when the pump is running and
not in evacuated condition.
➡
Unscrew both lubricant filler screws 31, taking care with
the sealing.
➡
Slowly fill in 24 ml of the accompanying lubricant into each
lubricant reservoir.
➡
Screw back in lubricant filler screws 31 with the sealing.
➡
During operations or at pump still stand check the
lubricant level on both sight glasses; the permissible level
is shown in the illustration.
➡
Switch off pump if lubricant is to be replenished.
➡
In non-stop operations check the lubricant monthly, on
both sight glasses 9 after each switch-on.
CAUTION
3.4. Filling In And Checking The
Lubricant
Before first-time starting ensure that both lubri-
cant reservoirs have been filled with each 2244 m mll
of Lubricant F3.
The delivery consignment for the standard
pump contains suffient lubricant (50 ml) for one
filling.
If ‘’F3’’ is heated above 300°C, toxic vapours
which can harm the respiratory tract are
emitted. Do not allow ‘’F3’’ to come into contact
with tobacco products (danger of poisoning
when ignited). The precautions necessary in
the handling of chemicals must be observed.
WARNING
CAUTION
5
ml m
l
4
3
2
1
V 10 ml
max.
min.
31
32
9
24 ml F3
Filling In And Checking The Lubricant
9 Sight glass (of lubricating pump)
31 Lubricant filler screw
32 Lubricant drain screw