Pfeiffer Vacuum HILOBE 1002, Руководство по эксплуатации

Страница: 4 / 68

6.3.5 Data types 36
7 Parameter set 37
7.1 General 37
7.2 Control commands 37
7.3 Status requests 38
7.4 Reference value inputs 39
7.5 Additional parameter for the DCU 39
8 Operation 40
8.1 Commissioning the vacuum pump 40
8.2 Switching on the vacuum pump 40
8.3 Configuring the connections with the Pfeiffer Vacuum parameter set 40
8.4 Operating modes 41
8.4.1 Normal operation 42
8.4.2 Stand-by operation 42
8.4.3 Rotation speed setting mode 42
8.5 Operation monitoring 42
8.5.1 Operating mode display via LED 42
8.5.2 Temperature monitoring 43
8.5.3 Check the lubricant level 43
8.6 Switching off and venting 43
9 Maintenance 45
9.1 Maintenance information 45
9.2 Checklist for inspection and maintenance 45
9.3 Cleaning the air filter 47
9.4 Changing the lubricant 47
9.4.1 Drain the lubricant 48
9.4.2 Filling with lubricant 48
10 Decommissioning 50
10.1 Shutting down for longer periods 50
10.2 Recommissioning 50
11 Recycling and disposal 51
11.1 General disposal information 51
11.2 Dispose of HiLobe roots pumps 51
12 Malfunctions 52
12.1 General 52
12.2 Troubleshooting 52
12.3 Error codes 53
12.4 Warning and error messages when operating with DCU 54
13 Service solutions by Pfeiffer Vacuum 55
14 Spare parts 57
15 Accessories 58
15.1 Accessory information 58
15.2 Order accessories 58
16 Technical data and dimensions 60
16.1 General 60
16.2 Substances in contact with the media 60
16.3 Technical data 61
16.4 Dimensions 63
Declaration of conformity 66
Table of contents
4/68