Pfeiffer Vacuum HILOBE 1002, Руководство по эксплуатации

Страница: 16 / 68

2.5 Proper use
► Use the vacuum pump for vacuum generation only.
► To protect the lubricant and the bearing, use sealing gas if high boiling, corrosive or particle-laden
media (e.g. solvents) are pumped.
► Operate the vacuum pump within the application limits of the product and in compliance with the
technical data.
► Adhere to the installation, commissioning, operating, and maintenance instructions.
► Use only accessory parts recommended by Pfeiffer Vacuum.
2.6 Foreseeable misuse
Misuse of the product invalidates all warranty and liability claims. Any use that is counter to the purpose
of the product, whether intentional or unintentional, is regarded as misuse.
● Pumping of explosive media
● Pumping radioactive media
● Pumping media that can corrode or not be withstood by the vacuum pump materials
● Pumping media that introduce an ignition source to the suction chamber
● Pumping media that form adhesive deposits inside the suction chamber and cause the pistons to
touch or jam
● Pumping pressurized media (> atmospheric pressure)
● Pumping fluids that do not serve cleaning
● Pumping media prone to spontaneous, specific exothermic reactions
● Use in potentially explosive areas
● Use in systems in which the equipment is subjected to dynamic loads and vibrations or periodic
forces
● Use in strong electrical, magnetic, or electromagnetic fields
● Use with vacuum and/or fore-vacuum flange open to the atmosphere
● Modification of frequency converter parameters in the electronic drive unit
● Using lubricants not specified by Pfeiffer Vacuum
● Using pipes to lift the vacuum pump
● Use of accessories or spare parts that are not listed in these instructions
● Using the vacuum pump as a climbing aid
● Use of mineral-based lubricants, such as P3, with an oxygen concentration > 21 %
Mineral-based lubricants are combustible and ignite at high temperatures, and when they come
into contact with pure oxygen. These lubricants oxidize heavily and thus lose their lubricating ca-
pacity.
2.7 Personnel qualification
The work described in this document may only be carried out by persons who have appropriate profes-
sional qualifications and the necessary experience.
Training people
1. Train the technical personnel on the product.
2. Only let personnel to be trained work with and on the product when under the supervision of
trained personnel.
3. Only allow trained technical personnel to work with the product.
4. Before starting work, make sure that the commissioned personnel have read and understood
these operating instructions and all applicable documents, in particular the safety, maintenance
and repair information.
2.7.1 Ensuring personnel qualification
Specialist for mechanical work
Only a trained specialist may carry out mechanical work. Within the meaning of this document, special-
ists are people responsible for construction, mechanical installation, troubleshooting, and maintenance
of the product, and who have the following qualifications:
● Qualification in the mechanical field in accordance with nationally applicable regulations
● Knowledge of this documentation
Safety
16/68