Pfeiffer Vacuum HILOBE 1002 Скачать руководство пользователя | Manualshive

Страница: 13 / 68

background image

CAUTION

Electric shock and damage to the vacuum pump and electronic drive unit due to improper
connection and disconnection of components

With existing power supply connection to the switch box, there is a risk of electric shock when making
contact with the motor connecting plug. Even after the power supply has been switched off, the vac-
uum pump continues to deliver electrical energy during its run-down period. If the units are discon-
nected prematurely, there is the risk of electric shock, and destruction of electric components.

► Always interrupt the power supply connection at the switch box before connecting the power sup-

ply plug to the motor.

► With existing power supply connection to the switch box or when the pistons are running, never

disconnect the motor connecting plug.

► After switching off, wait at least another 5 minutes until the capacitors have discharged before

separating the cable connection.

CAUTION

Danger of burns on hot surfaces

Depending on the operating and ambient conditions, the surface temperature of the vacuum pump
can increase to above 70 °C. If access to the vacuum pump is unrestricted, there is a danger of burns
due to contact with hot surfaces.

► Install suitable touch protection if the vacuum pump is accessible to untrained persons.
► Allow the vacuum pump to cool down before carrying out any work.
► Contact Pfeiffer Vacuum for suitable touch protection in system solutions.

Risks during operation

WARNING

Danger of poisoning due to toxic process media escaping from the exhaust pipe

During operation with no exhaust line, the vacuum pump allows exhaust gases and vapors to escape
freely into the air. There is a risk of injury and fatality due to poisoning in processes with toxic process
media.

► Observe the pertinent regulations for handling toxic process media.
► Safely purge toxic process media via an exhaust line.
► Use appropriate filter equipment to separate toxic process media.

CAUTION

Danger of injury from bursting as a result of high pressure in the exhaust line

Faulty or inadequate exhaust pipes lead to dangerous situations, e.g. increased exhaust pressure.
There is a danger of bursting. Injuries caused by flying fragments, the escaping of high pressure, and
damage to the unit cannot be excluded.

► Route the exhaust line without shut-off units.
► Observe the permissible pressures and pressure differentials for the product.
► Check the function of the exhaust line on a regular basis.

CAUTION

Danger of burns on hot surfaces

Depending on the operating and ambient conditions, the surface temperature of the vacuum pump
can increase to above 70 °C. If access to the vacuum pump is unrestricted, there is a danger of burns
due to contact with hot surfaces.

► Install suitable touch protection if the vacuum pump is accessible to untrained persons.
► Allow the vacuum pump to cool down before carrying out any work.
► Contact Pfeiffer Vacuum for suitable touch protection in system solutions.

Safety

13/68

«
...
11
12
13
14
15
...
»

Содержание HILOBE 1002





































































Отзывы:

Нет отзывов

Похожие инструкции для HILOBE 1002

Бренд: Quick Страницы: 16

Бренд: dafi Страницы: 12

Altherma 3 R F+W

Бренд: Daikin Страницы: 20

aroSTOR VWL B 200/5 UK

Бренд: Vaillant Страницы: 24

Бренд: Vaillant Страницы: 20

Бренд: Vaillant Страницы: 24

Бренд: Wilden Страницы: 32

Бренд: DROPSA Страницы: 9

Бренд: Little Giant Страницы: 2

Бренд: Sanden Страницы: 48

BlackFin CT-2902BPHP

Бренд: Panduit Страницы: 68

Speedflow SF10SS

Бренд: Hyco Страницы: 12

Бренд: German pool Страницы: 20

GOULDS 45HB-70HB

Бренд: Xylem Страницы: 12

OKCE 160 S/3-6 kW

Бренд: Dražice Страницы: 25

Бренд: Sears Страницы: 8

Бренд: IDEAL Страницы: 68

Бренд: Calpeda Страницы: 48

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды