Pfeiffer Vacuum HILOBE 1002 Скачать руководство пользователя | Manualshive

Страница: 14 / 68

background image

Risks during maintenance, decommissioning, disposal and in event of malfunctions

WARNING

Danger to life from electric shock during maintenance and service work

There is a danger to life from electric shock when making contact with live components that still exist
after the vacuum pump has been switched off.

► Disconnect the vacuum pump safely from the mains.
► Wait until the vacuum pump comes to a standstill (rotation speed = 0).
► After switching off the vacuum pump, wait another 5 minutes until the capacitors have dis-

charged.

WARNING

Danger to life from electric shock in the event of a fault

In the event of a fault, devices connected to the mains may be live. There is a danger to life from
electric shock when making contact with live components.

► Always keep the mains connection freely accessible so you can disconnect it at any time.

WARNING

Risk of crushing from rotating parts

Fingers and hands may be caught by rotating pistons within the connection flange. This results in se-
vere injuries.

► Keep limbs out of the reach of the roots pump.

WARNING

Health hazard through poisoning from toxic contaminated components or devices

Toxic process media result in contamination of devices or parts of them. During maintenance work,
there is a risk to health from contact with these poisonous substances. Illegal disposal of toxic sub-
stances causes environmental damage.

► Take suitable safety precautions and prevent health hazards or environmental pollution by toxic

process media.

► Decontaminate affected parts before carrying out maintenance work.
► Wear protective equipment.

CAUTION

Scalding from hot lubricant

Danger of scalding when draining lubricant if it comes into contact with the skin.

► Wear protective equipment.
► Use a suitable collection receptacle.

2.3 Safety precautions

Duty to provide information on potential dangers

The product holder or user is obliged to make all operating personnel aware of dangers
posed by this product.
Every person who is involved in the installation, operation or maintenance of the product
must read, understand and adhere to the safety-related parts of this document.

Infringement of conformity due to modifications to the product

The Declaration of Conformity from the manufacturer is no longer valid if the operator
changes the original product or installs additional equipment.

● Following the installation into a system, the operator is required to check and re-evalu-

ate the conformity of the overall system in the context of the relevant European Direc-
tives, before commissioning that system.

Safety

14/68

«
...
12
13
14
15
16
...
»

Содержание HILOBE 1002





































































Отзывы:

Нет отзывов

Похожие инструкции для HILOBE 1002

Delta Solo Compact MVP Series

Бренд: KSB Страницы: 40

Бренд: Versamatic Страницы: 18

Бренд: F.F. Group Страницы: 28

Бренд: OmarLift Страницы: 28

Бренд: Drazice Страницы: 28

Бренд: Einhell Royal Страницы: 52

Бренд: Hozelock Страницы: 2

Бренд: THERMEx Страницы: 50

Бренд: Walrus Страницы: 6

Бренд: emaux Страницы: 31

Бренд: Pattfield Ergo Tools Страницы: 154

Бренд: Eckerle Страницы: 16

Бренд: VOKERA Страницы: 19

Бренд: DR. Heater Страницы: 32

Бренд: Metabo Страницы: 61

Бренд: PONNDORF Страницы: 34

Бренд: Xylem Страницы: 21

Бренд: Carrier Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды