Pfeiffer Vacuum HILOBE 1002, Руководство по эксплуатации

Страница: 39 / 68

# Display Designations Func-
tions
Data
type
Access
type
Unit min. max. de-
fault
364 ErrHist5 Error code history, item 5 4 R
398 ActualSpd Actual speed (rpm) 1 R rpm
399 NominalSpd Nominal rotation speed (rpm) 1 R rpm
Tbl. 10: Parameter set | Status requests
7.4 Reference value inputs
# Display Designations Functions Data
type
Ac-
cess
type
Unit min. max. de-
fault
706 DefaultSpd Specification in nor-
mal operation
Rotation speed as a
% of the nominal
speed
2 RW % 25 100 100
707 SpdSVal Setpoint in speed-
control operation
Set rotation speed as
% of nominal rotation
speed
2 RW % 25 100 75
717 StdbySVal Specification in
stand-by operation
Rotation speed as a
% of the nominal
speed
2 RW % 25 100 30
797 RS485Adr RS-485 Interface ad-
dress
1 RW 1 255 1
Tbl. 11: Parameter set | Reference value inputs
7.5 Additional parameter for the DCU
Additional parameter in the control panel
The basic parameter set is set in the electronic drive unit ex-factory. For controlling con-
nected external components (e.g. vacuum measuring instruments), additional parameters
(extended parameter set) are available in the corresponding Pfeiffer Vacuum display and
control panels.
● Refer to the corresponding operating instructions of the respective components.
● Select the extended parameter set with parameter
[P:794] = 1.
# Display Description Functions Data
type
Access
type
Unit min. max. de-
fault
340 Pressure Actual pressure value
(ActiveLine)
7 R hPa 1·10 -10 1·10 3
350 Ctr Name Display and control
panel: type
4 R
351 Ctr Software Display and control
panel: software version
4 R
738 Gauge type Type of pressure gauge 4 RW
794 Param set Parameter set 0 = Basic pa-
rameter set
1 = Extended
parameter set
7 RW 0 1 0
795 Servicelin Insert service line 7 RW 795
Tbl. 12: Parameter for DCU functions
Parameter set
39/68