Pfeiffer Vacuum HiCube 30 Eco, Руководство по эксплуатации

Страница: 44 / 60

Display Problem Possible causes Remedy
E008 Connection, electronic drive
unit - pump faulty
● Connection to the pump
faulty
● Check connections
● Acknowledge only at rotation speed f = 0
E010 Internal device error
● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E021 Electronic drive unit does
not detect the pump
● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E043 Internal configuration error
● Contact Pfeiffer Vacuum Service.
E044 Excess temperature, elec-
tronics
● Faulty cooling ● Improve the cooling
● Check the operating conditions
E045 Excess temperature, motor
● Faulty cooling ● Improve the cooling
● Check the operating conditions
E046 Internal initialization error ● Contact Pfeiffer Vacuum Service.
E091 Internal device error ● Contact Pfeiffer Vacuum Service.
E092 Unknown connection panel
● Contact Pfeiffer Vacuum Service.
E093 Motor temperature evalua-
tion faulty
● Contact Pfeiffer Vacuum Service.
E094 Electronics temperature
evaluation faulty
● Contact Pfeiffer Vacuum Service.
E098 Internal communication er-
ror ● Contact Pfeiffer Vacuum Service.
E107 Final stage group error ● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E108 Rotation speed measure-
ment faulty ● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E109 Software not released ● Contact Pfeiffer Vacuum Service.
E110 Operating fluid evaluation
faulty
● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E111 Operating fluid pump com-
munication error
● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E112 Operating fluid pump group
error
● Contact Pfeiffer Vacuum Service.
● Acknowledge only at rotation speed f = 0
E114 Final stage temperature
evaluation faulty
● Contact Pfeiffer Vacuum Service.
E117 Excess temperature, pump
lower part
● Faulty cooling ● Improve the cooling
● Check the operating conditions
E118 Excess temperature, final
stage
● Faulty cooling ● Improve the cooling
● Check the operating conditions
E119 Excess temperature, bear-
ing
● Faulty cooling ● Improve the cooling
● Check the operating conditions
E143 Operating fluid pump ex-
cess temperature
● Faulty cooling ● Improve the cooling
● Check the operating conditions
● Acknowledge only at rotation speed f = 0
E777 Nominal rotation speed not
confirmed
● Nominal rotation speed
not confirmed after re-
placing the electronic
drive unit
● Confirm the nominal rotation speed with
[P:
777]
● Acknowledge only at rotation speed f = 0
F001 TMS heat-up time expired ● Internal timer for heat-
up monitoring exceeded
● Check the operating conditions
Malfunctions
44/60