Petsafe PPA00-15930 Скачать руководство пользователя страница 3

www.petsafe.net

3

•  If the product or battery becomes too hot to the touch during charging, disconnect the power adapter from the charger and unplug 

from the power outlet immediately. 

•  Do not charge battery if the battery has expanded or swollen in size, or if the battery has been punctured, even if this is the first time 

the battery is going to be charged.

•  If an exposed lithium-ion battery does start a fire, it may burn even more violently if it comes into contact with water or even the 

moisture in the air. DO NOT THROW WATER ON A BURNING LITHIUM-ION BATTERY! A class C fire extinguisher must be used.

•  Do not disassemble or modify the battery. The battery contains safety and protection devices which, if damaged, may cause the 

battery to generate heat, rupture or ignite. Any modification may damage the battery or cells and will invalidate any warranty claim.

•  If you happen to get any electrolyte from the battery cells on your skin, wash thoroughly with soap and water. If in your eyes, do not 

rub. Rinse thoroughly with water and seek medical assistance.

•  Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to 

become hot, rupture, or ignite. 

•  Storage: For long term storage, the battery should be stored at room temperature (around 68° F / 20° C), charged at about 30 to 

50% of its capacity. We recommend that spare batteries are charged and used at least once per year to prevent over-discharge.

•  Do not use the charger with other lithium batteries or with any other type of batteries– fire or explosion may occur.
•  Never modify or repair the charger supplied.
•  Never use a NiCd charger or any other charger to recharge the lithium-ion battery as this is very dangerous.
•  Do not disassemble charger.
•  Disconnect power adapter from charger and power adapter from outlet when not in use or when finished charging battery to 

reduce risk of electric shock.

•  Only use designated power adapter with charger to charge battery.
•  Do not operate charger with a damaged plug or use charger if damaged in any way.

•  The user, prior to installation, must become familiar with all building codes that may affect the installation of the pet door and 

determine, along with a licensed contractor, its suitability in a given installation. This pet door is not a fire door. It is important for the 
owner and contractor to consider any risks that may be present inside or outside of the pet door, any risks that may be created by 
subsequent changes to your property and how they may relate to the existence and use, including misuse of the pet door.

•  If cutting metal surface, be aware of sharp edges to prevent injury.

•  During pet training while pet door is in Open Mode, make sure to GENTLY lower flap onto pet’s back. Also avoid possible injury by 

making sure your pet is entirely through the pet door opening, including paws and tail, before completely releasing flap.

•  Do not allow your pet to chew on the power cord.

•  Read this entire guide prior to cutting or modifying an opening in your door or wall. Do not proceed with cut-out or installation until 

your pet door is assembled, powered up, programmed for your pet and all steps under “Prepare, Setup and Test” have been 
completed.

•  Keep these instructions with important papers; be sure to transfer these instructions to the new owner of the property.
•  Unauthorized changes or modifications may void the user’s authority to operate this equipment, and void the warranty.
•  We do not accept any responsibility for openings that are cut or modified in doors or walls or any damage caused to doors or 

walls in forming or modification of such openings, including any costs associated with the repair or replacement.

•  The unit only operates properly while outside temperatures are greater than -5°F (-20.5° C) and less than 131° F (55° C). If 

operating from the rechargeable lithium-ion battery, the battery and battery compartment cannot be exposed to temperatures 
below 32° F (0° C).

•  Do not install in a location where the pet door interior frame, including the LCD screen and battery compartment, and the power 

adapter are exposed to damp or wet conditions or to water or outside elements, such as rain or snow.

•  Only use designated power adapter with the product.

Содержание PPA00-15930

































Отзывы: