Permaquip Kubota RTV X900 RRV, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 72

MAN-M-O-220_01 24/01/2019 Page 21 of 72
5.4. Rear Seat/Load
When exiting from the rear seats, face towards the front of the vehicle to
step down as this is the safest method (in the same manner to climbing
down a ladder). Step on white areas only as these have a gritted non-slip
surface.
An Emergency Stop and horn button have been fitted to allow passengers on the
rear seats (rail mode only), as shown below.
The Emergency Stop will cut power to the rail conversation and vehicle engine. It will
power a latching engine stop relay, thereby bringing the vehicle to a stop in the
required distance. If the triggered emergency stop is reset then the rail
enhancements will be re-activated. The engine will not restart without the ignition key
being turned to the start position. Permaquip recommend bringing the vehicle to a
controlled stop prior to the resetting of any of the Emergency stops.
The rear seats can be raised should loads be required to be carried. It is not
recommended that loads and personnel are transported at the same time.
Loads can be restrained by using the rear load bay fabrication tubes. Do not over
tighten any restraints, causing damage to the load or fabrication.
Each raised and lowered position should be locked in position with the Safety Pin, as
shown below.