PerkinElmer Wallac 1420, Руководство пользователя

Страница: 42 / 171

Protocol editing
40
Protocol editor
Note: changes to protocols should only be made by authorized persons.
The protocol editor window contains seven tabs:
Samples - shows a plate map to allow you to edit wells and plates
ID - you can identify the protocol
Measurement - you can select the labels used for measurement
Plate - you can select the plate type and other parameters
Outputs
- you can define the output
Events - you can give a command to be followed after an assay has been run with this
protocol
General - information about the protocol
You can set parameters for up to 40 plates in one protocol.
Protocol entries are checked for validity by the software and invalid entries are informed
when you try to switch from one view to another.
When you have edited a protocol you can use the command line or the button bar to save or
print the protocol.
Note - if you want to change the plate type, do this before setting other plate parameters .
This is because when the plate type is changed all the previous plates will be deleted and
one plate of the selected type will appear.