PerkinElmer Wallac 1420, Руководство пользователя

Страница: 100 / 171

Tools menu
98
Changing filters in the software
Note: if you change a filter in the software you must also change it physically in the filter
slide or wheel.
When you select Properties, a picture of the selected slide appears with the filters that are
loaded in it marked in red or black as shown previously. Those that are in red are factory
pre-set. The excitation filter slide is in the form of a wheel and the emission filter slide is a
strip
.
To
move a filter from the list to a place on the slide
, move the cursor to the filter name on
the list, drag it keeping the mouse button pressed down until it is over the empty slide
position that you want it to occupy, then release the mouse button. The name of the filter
will appear in black in the slide position.
To move a filter from one position to another , click on it and drag it to the empty place
you want it to occupy.
To remove a filter from the slide , click on it and drag it back to anywhere in the area of
the Available filters list, then release the mouse button.