PerkinElmer Wallac 1420, Руководство пользователя

Страница: 30 / 171

Operating Wallac 1420
28
Starting operation and using a protocol number
barcode
1. When you load a plate, the button will be blinking. See the picture on page 20 for correct
plate orientation.
Load the first
plate
Light is
blinking
2. Press the button briefly. Operation will start. The button light will be lit without blinking.
The barcode on the plate will be read and the protocol specified by the barcode will be
selected and used for measuring the plate.
When the measurement has finished and the light starts blinking again, remove the plate and
load the next one and briefly click the button. If the plate belongs to the same assay as the
previous one, no barcode is needed. If it is barcoded for a new assay then the appropriate
protocol will be used for measuring the plate.
1. Remove the
measured plate
2. Load the
next plate
Continue measuring plates this way. Note that the button light will remain blinking as long
as the protocol number barcode option is selected.