PerkinElmer Wallac 1420, Руководство пользователя

Страница: 41 / 171

Protocol editing
39
Protocol selection
You can: Open , copy , paste , start or create a protocol, delete a user made protocol (plus
its associated results). In the enhanced security mode you have to belong to the Operator
user group to start a protocol.
To open an existing protocol you can do one of the following:
a) Move the mouse cursor onto it and then click the left mouse button to select it, then click
the
File menu and click Open .
b) Move the cursor on to it, click the right mouse button and select Open from the menu
that appears.
c) Double-click the mouse when the cursor is on the icon.
At the bottom of the window on the status line the protocol ID will appear (if defined,
otherwise it is not available, N/A) and also any notes that have been included in the
protocol.
When you create a protocol you can save it e.g. as a user protocol in the Users folder, or
you can save it according to the technology. The choice is yours, but the default structure
gives you a starting point and helps you to find the pre-set protocols.
You can move a user made protocol to a different folder by selecting it, holding down the
mouse button, dragging it to the target folder and releasing the mouse button.
Note: The dual label protocol (only available if TR-FIA is installed) should not be copied
and edited e.g. to make a single label europium or samarium protocol. You should begin
with an existing single label protocol. For dual label operation, you must select the
europium label first and then the samarium label. After you have selected the second label, a
third, samarium in the europium window, will be created automatically. When running with
these three labels you must have a valid Eu/Sm normalization, see the
Tools menu for how
to make such a normalization.
For information about results see the chapter on "Result viewing".