Pepwave BR1 Slim Скачать руководство пользователя страница 93

Страница: 93 / 154

http://www.pepwave.com

fill in the Protocol and a single Port number of common Internet services (e.g. HTTP,
HTTPS, etc.).

After selecting an item from the Protocol Selection Tool drop-down menu, the Protocol and
Port number remains manually modifiable.

Port

The Port setting specifies the port(s) that correspond to the service, and can be configured
to behave in one of the following manners:

Any Port, Single Port, Port Range and Port Map

Any Port: All traffic that is received by the Pepwave MAX via the specified protocol is
forwarded to the servers specified by the Servers setting.

For example, with IP Protocol set to TCP, and Port set to Any Port, all TCP traffic is
forwarded to the configured servers.

Single Port

: Traffic that is received by the Pepwave MAX via the specified protocol at the

specified port is forwarded via the same port to the servers specified by the Servers
setting.

For example, with IP Protocol set to

TCP

, and Port set to

Single Port

and

Service Port

, TCP traffic received on Port 80 is forwarded to the configured servers via Port 80.

Port Range

: Traffic that is received by the Pepwave MAX via the specified protocol at the

specified port range is forwarded via the same respective ports to the LAN hosts specified
by the Servers setting.

For example, with IP Protocol set to

TCP

, and Port set to

Single Port

and

Service Port

80-88

, TCP traffic received on ports 80 through 88 is forwarded to the configured servers

via the respective ports.

Port Mapping

: Traffic that is received by the Pepwave MAX via the specified protocol at

the specified port is forwarded via a different port to the servers specified by the Servers
setting.

For example, with IP Protocol set to

TCP

, and Port set to

Port Map

Service Port 80

, and

Map to Port 88

, TCP traffic on Port 80 is forwarded to the configured servers via Port 88.

(Please see below for details on the Servers setting.)

Range Mapping

: traffic that is received by the Pepwave MAX via the specified protocol at

the specified port range is forwarded via a different port to the servers specified by the
Servers setting.

Inbound IP

Address(es)

This setting specifies the WAN connections and Internet IP address(es) from which the
service can be accessed.

It is required to select at least one IP address.

Server IP

Address

This setting specifies the LAN IP address of the server that handles the requests for the
service.

Содержание BR1 Slim





















































































































































Результаты поиска

Содержание BR1 Slim

Отзывы:

Похожие инструкции для BR1 Slim

Бренды по названию

Популярные бренды

Pepwave BR1 Slim, Руководство пользователя

Результаты поиска

Содержание BR1 Slim

Отзывы:

Похожие инструкции для BR1 Slim

Бренды по названию

Популярные бренды