http://www.pepwave.com
121
Copyright @ 2014 Pepwave
Administrative Settings configuration is located at
System>Admin Security
:
Admin Settings
Router Name
This field allows you to define a name for this Pepwave MAX unit.
By default, Router Name is set as
MAX_XXXX
, where XXXX refers to the last 4
digits of the serial number of the device.
Admin User Name
It is set as
admin
by default and is not customizable.
Admin Password
This field allows you to specify a new administrator password.
Confirm Admin
Password
This field allows you to verify and confirm the new administrator password.
Read-only User Name
It is set as
user
by default and is not customizable.
User Password
This field allows you to specify a new user password. Once the user password is
set, the feature of read-only user will be enabled.
Confirm User
Password
This field allows you to verify and confirm the new user password.
Web Session Timeout
This field specifies the number of hours and minutes that a web session can remain
idle before the device terminates its access to Web Admin Interface.
By default, it is set as
4 hours
.
Authentication by
RADIUS
With this box is checked, Web Admin will authenticate using an external RADIUS
server.
Authenticated users are treated as "admin" with full read-write permission
or “user”
with read-only access.Local "admin" and "user" accounts will be disabled. When the
