http://www.pepwave.com
68
Copyright @ 2014 Pepwave
to create a new VPN profile.Each profile is for making VPN connection
with one remote Peplink Balance/Pepwave MAX. Once you click on New Profile button this will open a
window:
PepVPN Profile
Active
Check this box to enable VPN functionality.
Encryption
By default, VPN traffic is encrypted with 256-bit AES standard. If the option Off is selected
on both sides of a VPN connection, no encryption will be applied.
Remote ID
The Pepwave MAX establishes VPN connection with a remote peer that has a serial
numberor a remote ID here.
Authentication
Select from
By Remote ID Only
,
Preshared Key
, or
X.509
to specify the method the
Pepwave MAX will use to authenticate peers. When selecting
By Remote ID Only
, be sure
to enter a unique peer ID number in the
Remote ID
field.
Remote ID
:
To allow the Pepwave MAXto establisha VPN connection with a specific remote peer using
a unique identifying number.
Preshared Key
:
Pre-shared Key
defines the pre-shared key used for this particular VPN connection. The
connection will be up only if the pre-shared keys on each side match.When the peer is
running firmware 5.0+, this setting will be ignored. If you would like to prevent the display of
the pre-shared key, check
Hide Characters
.
