http://www.pepwave.com
67
Copyright @ 2014 Pepwave
12
Bandwidth Bonding SpeedFusion
TM
The Pepwave Bandwidth Bonding SpeedFusion
TM
functionality securely connectsyourMAX router to
anotherPepwave MAX or Peplink device (only Peplink Balance 210/310/380/580/710/1350 are available
for this function). The data, voice, or video communications between these locations are kept confidential
across the public Internet.
The Bandwidth Bonding SpeedFusion
TM
of the Pepwave MAX is specifically designed for multi-WAN
environment. The Pepwave MAX
can aggregate all WAN connections’ bandwidth for routing
SpeedFusion
TM
traffic. Unless all the WAN connections of one site are down, the Pepwave MAX can still
maintain VPN up and running.
VPN Bandwidth Bonding is supported in firmware 5.1 or above. All available bandwidth will be utilized to
establish the VPN tunnel, and all traffic will be load balanced at packet level across all links.VPN
Bandwidth Bonding is enabled by default.
12.1 PepVPN
The local LAN subnet and subnets behind the LAN (defined under
Static Route
in the LAN settings page)
will be advertised to the VPN.All VPN members (branch offices and headquarters) will be able to route to
the local subnets.Note that all LAN subnet and subnets behind it have to be unique.Otherwise, VPN
members will not be able to access each other.
All data can be routed over the VPN with 256-bit AES encryption standard.
To configure, navigate to
Advanced>PepVPN,
click the
New Profile
button