http://www.pepwave.com
117
Copyright @ 2014 Pepwave
21.2 Settings
AP Settings
SSID
These buttons specify which wireless networks will use this AP Profile. You can also
select the frequencies at which each network will transmit. Please note that the Peplink
Balance does not detect weather the AP is capable of transmitting at both frequencies.
Instructions to transmit at unsupported frequencies will be ignored by the AP.
Operating Country
This drop-down menu specifies the national / regional regulations which the AP should
follow.
If a North American region is selected, RF channels 1 to 11 will be available and
the maximum transmission power will be 26 dBm (400 mW).
If European region is selected, RF channels 1 to 13 will be available. The
maximum transmission power will be 20 dBm (100 mW).
NOTE: Users are required to choose an option suitable to local laws and regulations.
The country code selection is for non-US model only and is not available to all US
model. Per FCC regulation, all WiFi product marketed in US must fixed to US
operation channels only.
Preferred Frequency
These buttons determine the frequency at which access points will attempt to broadcast.
This feature will only work for AP that can transmit at both 5.4GHz and 5GHz
