http://www.pepwave.com
69
Copyright @ 2014 Pepwave
X.509
To authenticate VPN connections using X.509 certificates, copy and paste certificate details
into this field. To get more information on a listed X.509 certificate, click the
Show Details
link below the field.
NAT Mode
By selecting this option, the remote unit VPN will be assigned with an IP address from the
local DHCP server. All the remote side traffic via this VPN will go through Network Address
Translation (NAT) using the assigned IP address.
RemoteIP
Addresses / Host
Names
Enter the remote peer’s WAN IP address(es) or host name(s) here. Dynamic-DNS host
names are accepted.
This field is optional. With this field filled, the Pepwave MAX will initiate connection to each
of the remote IP addresses until success. If the field is empty, the Pepwave MAX will wait
for connection from the remote peer. Therefore, at least one side of the two VPN peers has
to have the field filled. Otherwise, VPN connection cannot be established.
Enter one IP address or host name per line.
Data Port
If
Default
is selected, VPN data will go through UDP port 4500.
Select
Custom
and enter a port number if a specific outgoing port is desired.
