http://www.pepwave.com
119
Copyright @ 2014 Pepwave
before doing retransmission. The default value is 48
μs.
Frame Aggregation
A
With this feature enabled, throughput will be increased by sending two or more data
frames in a single transmission.
A
- Advanced feature, please click the
button on the top right hand corner to activate.
Web Administration Settings (on External AP)
Enable
Check the box to allow Peplink Balance to manage the web admin access information of
the AP.
Web Access Protocol
Thesebuttonsspecify the web access protocol used for accessing the web admin of AP.
The two available options are HTTP and HTTPS.
Management Port
This field specifies the management port used for accessing the device.
HTTP to HTTPS
Redirection
This option will be available if you have chosen HTTPS as the Web Access Protocol.
With this enabled, any HTTP access to the web admin will be redirect to HTTPS
automatically.
Admin User Name
This field specifies the administrator username of the web admin. It is set as admin by
default.
Admin Password
This field allows you to specify a new administrator password. You may also click the
Generate button and let the system generate a random password automatically.
21.3 Toolbox
Additional tools for managing firmware packs can be found under
AP >Toolbox
.
Firmware Packs
This is the first menu that will appear. Here, you can manage the firmware of your AP. Clicking on
will result
in information regarding each firmware pack. To receive new firmware packs, you can either press
to download new packs or you can press
to manually upload a firmware pack.
Press
to define which firmware pack is default.
