peplink MediaFast 200, Руководство пользователя

Страница: 137 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -137 / 269 - Copyright © 2016 Peplink
17.2.6 Algorithm: Least Used
The traffic matching this rule will be routed through the healthy WAN connection that is
selected in Connection and has the most available download bandwidth. The available
download bandwidth of a WAN connection is calculated from the total download
bandwidth specified on the WAN settings page and the current download usage. The
available bandwidth and WAN selection is determined every time an IP session is
made.
17.2.7 Algorithm: Lowest Latency
The traffic matching this rule will be routed through the healthy WAN connection that is
selected in Connection and has the lowest latency. Latency checking packets are
issued periodically to a nearby router of each WAN connection to determine its latency
value. The latency of a WAN is the packet round trip time of the WAN connection.
Additional network usage may be incurred as a result.
Tip
The round trip time of a 6M down /640k uplink can be higher than that of a 2M down /2M up link because the overall
round trip time is lengthened by its slower upload bandwidth, despite its higher downlink speed. Therefore, this
algorithm is good for two scenarios:

All WAN connections are symmetric; or

A latency sensitive application must be routed through the lowest latency WAN, regardless of the WAN’s
available bandwidth.