peplink MediaFast 200, Руководство пользователя

Страница: 81 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -81 / 269 - Copyright © 2016 Peplink
Shared Drop-In
IP
A
When this option is enabled, the passthrough IP address will be used to connect to WAN
hosts (email notification, remote syslog, etc.). The Balance will listen for this IP address
when WAN hosts access services provided by the Balance (web admin access from the
WAN, DNS server requests, etc.).
To connect to hosts on the LAN (email notification, remote syslog, etc.), the default gateway
address will be used. The Balance will listen for this IP address when LAN hosts access
services provided by the Balance (web admin access from the WAN, DNS proxy, etc.).
Shared IP
Address
A
Access to this IP address will be passed through to the LAN port if this device is not serving
the service being accessed. The shared IP address will be used in connecting to hosts on
the WAN (e.g., email notification, remote syslog, etc.) The device will also listen on the IP
address when hosts on the WAN access services served on this device (e.g., web admin
accesses from WAN, DNS server, etc.)
WAN Default
Gateway
Enter the WAN router's IP address in this field. If there are more hosts in addition to the
router on the WAN segment, click the
button next to “WAN Default Gateway” and check
the I have other host(s) on WAN segment box and enter the IP address of the hosts that
need to access LAN devices or be accessed by others.
WAN DNS
Servers
Enter the selected WAN's corresponding DNS server IP addresses.
A
- Advanced feature, please click the button on the top right-hand corner to activate.
Layer 2 PepVPN Bridging Settings
PepVPN
Profiles to
Bridge
The remote network of the selected PepVPN profiles will be bridged with this local LAN,
creating a Layer 2 PepVPN. They will be connected and operate like a single LAN, and any
broadcast or multicast packets will be sent over the VPN.
Remote
Network
Isolation
Enable this option if you want to block network traffic between the remote networks. This will
not affect the connectivity between them and this local LAN.
Spanning Tree
Protocol
Click this checkbox to enable spanning tree protocol in your L2 PepVPN.
Override IP
Address when
bridge
connected
Select Do not override if the LAN IP address and local DHCP server should remain
unchanged after the Layer 2 PepVPN is up.
If you choose to override IP address when the VPN is connected, the device will not act as a
router, and most Layer 3 routing functions will cease to work.