peplink MediaFast 200, Руководство пользователя

Страница: 103 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -103 / 269 - Copyright © 2016 Peplink
14.2.5 Mobile Internet Connection
The Mobile Internet Connection method is suitable for USB modem mobile
connections, such as 3G, WiMAX, LTE, EVDO, EDGE, and GPRS. Currently, it only
applies to connections made via the Balance’s USB mobile WAN port, except in the
case of the Balance units that include a built-in 4G LTE modem. For a list of supported
modems, please refer to Peplink Modem Support page at
http://www.peplink.com/modem.
Mobile Internet Connection Settings
WAN
Connection
Name
Enter a name for this WAN connection.
Enable
Click the box to enable the connection.
Connection
Type
This setting specifies the utilization of the WAN connection. Always-on results in the WAN
connection being used whenever it is available. If Backup is selected, the WAN connection is
treated as a backup connection and is used only in the absence of an available always-on WAN.
The default and recommended connection type is Always-on.
Standby
State
This option allows you to choose whether to remain connected or disconnect when this WAN
connection is no longer in the highest priority and has entered the standby state. When Remain
connected is chosen and this WAN connection is made active, the WAN connection will be
immediately available for use.
Idle
Disconnect
With this option enabled, an idle connection will be disconnected after a specified period of time.
This time value specified is global and will affect all WAN profiles. The mobile connection will re-
establish on demand.
Reply to
ICMP
Ping
If this field is disabled, the WAN connection will not respond to ICMP ping requests. By default,
this setting is enabled.