peplink MediaFast 200, Руководство пользователя

Страница: 140 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -140 / 269 - Copyright © 2016 Peplink
18.2
Definition of Port Forwarding
Inbound port forwarding rules are defined at Network>Inbound Access>Services.
To define a new service, click the Add Service button after adding a server under
Network>Inbound Access>Service. The following screen is displayed:
Port Forwarding Settings
Enable
This setting specifies whether the inbound service takes effect. When Enable is checked, the
inbound service takes effect: traffic is matched and actions are taken by the Peplink Balance
based on the other parameters of the rule. When this setting is disabled, the inbound service
does not take effect: the Peplink Balance disregards the other parameters of the rule.
Service
Name
This setting identifies the service to the system administrator. Valid values for this setting
consist of only alphanumeric and underscore “_” characters.
IP Protocol
The IP Protocol setting, along with the Port setting, specifies the protocol of the service as
TCP, UDP, ICMP, or IP. Traffic that is received by the Peplink Balance via the specified
protocol at the specified port(s) is forwarded to the LAN hosts specified by the Servers setting.
Please see below for details on the Port and Servers settings.
Alternatively, the Protocol Selection Tool drop-down menu can be used to automatically fill in
the protocol and a single port number of common Internet services (e.g. HTTP, HTTPS, etc.)
After selecting an item from the Protocol Selection Tool drop-down menu, the protocol and
port number remain manually modifiable.