peplink MediaFast 200, Руководство пользователя

Страница: 133 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -133 / 269 - Copyright © 2016 Peplink
Destination
This setting specifies the destination IP address, IP network, or domain name for traffic that
matches the rule.
If Domain Name is chosen and a domain name, such as foobar.com, is entered, any
outgoing accesses to foobar.com and *.foobar.com will match this criterion. You may enter
a wildcard (.*) at the end of a domain name to match any host with a name having the
domain name in the middle. If you enter foobar.*, for example, www.foobar.com,
www.foobar.co.jp, or foobar.co.uk will also match. Placing wildcards in any other position is
not supported.
NOTE: if a server has one Internet IP address and multiple server names, and if one of the
names is defined here, accesses to any one of the server names will also match this rule.
Protocol and Port
This setting specifies the IP protocol and port of traffic that matches this rule. You may
select common protocols from the Protocol Selection Tool drop-down menu.
Algorithm
This setting specifies the behavior of the Peplink Balance for the custom rule.
One of the following values can be selected:

Weighted Balance

Persistence

Enforced

Priority

Overflow

Least Used

Lowest Latency
The upcoming sections detail the listed algorithms.
Terminate
Sessions on Link
Recovery
This setting specifies whether to terminate existing IP sessions on a less preferred WAN
connection in the event that a more preferred WAN connection is recovered. This setting is
applicable to the Weighted, Persistence, and Priority algorithms.
By default, this setting is disabled. In this case, existing IP sessions will not be terminated
or affected when any other WAN connection is recovered. When this setting is enabled,
existing IP sessions may be terminated when another WAN connection is recovered, such
that only the preferred healthy WAN connection(s) is used at any point in time.
17.2.1 Algorithm: Weighted Balance
This setting specifies the ratio of WAN connection usage to be applied on the specified
IP protocol andport. This setting is applicable only when Algorithm is set to Weighted
Balance.