peplink MediaFast 200, Руководство пользователя

Страница: 135 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -135 / 269 - Copyright © 2016 Peplink
There are two persistent modes: By Source and By Destination.
By Source: The same WAN connection will be used for traffic matching the rule and originating from the
same machine, regardless of its destination. This option will provide the highest level of
application compatibility.
By Destination: The same WAN connection will be used for traffic matching the rule, originating from the
same machine, and going to the same destination. This option can better distribute loads to
WAN connections when there are only a few client machines.
The default mode is By Source.
When there are multiple client requests, they can be distributed (persistently) to WAN
connections with a weight. If you choose Auto in Load Distribution, the weights will be
automatically adjusted according to each WAN’s Download Bandwidth, which is
specified in the WAN settings page (see Section
14
, Configuring the WAN
Interface(s)). If you choose Custom, you can customize the weight of each WAN
manually using the provided sliders.
17.2.3 Algorithm: Enforced
This setting specifies the WAN connection usage to be applied on the specified IP
protocol and port. This setting is applicable only when Algorithm is set to Enforced.
Matching traffic will be routed through the specified WAN connection, regardless of the
health check status of the WAN connection.
Starting from Firmware 5.2, outbound traffic can be enforced to go through a specified
SpeedFusion
TM connection.
17.2.4 Algorithm: Priority
This setting specifies the priority of the WAN connections used to route the specified