peplink MediaFast 200, Руководство пользователя

Страница: 97 / 278

USER MANUAL
Peplink Balance Series
http://www.peplink.com -97 / 269 - Copyright © 2016 Peplink
5. GRE
See Sections 14.2.1, 14.2.2, 14.2.3, 14.2.4 and 14.2.5 for configuration details pertaining
to each connection method.
Routing Mode
This field shows that NAT (network address translation) will be applied to the traffic routing
over this WAN connection. IP Forwarding is also available when you click the link in the
help text. For further details, please refer to
Appendix
B,
Routing under DHCP, Static IP, and PPPoE
.
Connection
Type
This setting specifies the utilization of the WAN connection.
Always-on results in the WAN connection being used whenever it is available. If Backup
Priority and a priority group are selected, the WAN connection is treated as a backup
connection and is used only in the absence of available always-on WAN connection(s) and
higher priority backup connection(s).
The default and recommended connection type is Always-on.
Reply to ICMP
Ping
If this field is disabled, the WAN connection will not respond to ICMP ping requests. By
default, this setting is enabled.
Upload
Bandwidth
This setting specifies the data bandwidth in the outbound direction from the LAN through
the WAN interface. This value is provided by your ISP and should reflect the actual speed
of the WAN. This value is referenced when default weight is chosen for outbound traffic
and traffic prioritization. Setting the correct value here can result in effective traffic
prioritization and efficient use of upload bandwidth.
Download
Bandwidth
This setting specifies the data bandwidth in the inbound direction from the WAN interface
to the LAN. This value is provided by your ISP and should reflect the actual speed of the
WAN. This value is referenced as the default weight value when using the Least Used or
Persistence (Auto) algorithms in Outbound Policy with Managed by Custom Rules
chosen.
IPv6
IPv6
IPv6 support can be enabled on one of the available Ethernet WAN ports. On this screen,
you can choose which WAN will support IPv6.
To enable IPv6 support on a WAN, the WAN router must respond to stateless address
auto configuration advertisements and DHCPv6 requests. IPv6 clients on the LAN will
acquire their IPv6, gateway, and DNS server addresses from it. The device will also
acquire an IPv6 address for performing ping/traceroute checks and accepting web admin
accesses.