Pentax Pentax Photo Browser 2.1, Руководство по эксплуатации

Страница: 20 / 104

18
L
is used as an example here. When using w , [Transfer Mode]
does not need to be set. Go to “Connecting the Camera and Macintosh” (p.19).
1
Press the 3 button on the camera.
The [
A
Rec. Mode] menu or the [
Q
Playback] menu appears.
2
Press the four-way controller (
5
) to display the [
H
Set-up]
menu.
3
Use the four-way controller (
23
) to select [Transfer Mode].
4
Press the four-way controller (
5
).
A pull-down menu appears.
5
Use the four-way controller
(
23
) to select [PC].
[Transfer Mode] settings depend on the
connected device.
When connecting to a PC:
[PC] = USB 2.0 (Hi-Speed USB
compatible)
[PC-F] = USB 1.1
When printing with a printer:
[PictBridge] (only for compatible printers)
6
Press the 4 button on the camera.
Saving Images by Connecting Your Camera
and Macintosh (For Macintosh)
Setting the USB Connection Mode to [PC]
• Do not connect the camera to your computer while [PictBridge] is selected for
the [Transfer Mode].
• If the USB transmission speed of the computer is slower than that of the
camera, an error may occur when transferring data. If this occurs, set the
Transfer Mode to [PC-F]. This sets the transfer speed to the USB 1.1 data
transfer rate, thereby reducing the possibility of an error.
NTSC
P C
P C - F
Brightness Level
Set-up
Video Out
Transfer Mode
Auto Power Off
File #
Sensor Cleaning
0
OK
OK Cancel
PictBridge