ULTRATEMP ETI™ Hybrid Heater Installation and User’s Guide
31
Run Time Counters
Details of the Run Time Counter abbreviations are
listed below:
COMP = COMPRESSOR
FAN = EVAPORATOR FAN
REV VLV = REVERSING VALVE
DEFROST = DEFROST FEATURE
GAS = GAS HEATER
RUN TIME
= total time of the current cycle
LOG TIME
= accumulated time of all cycles since the
last time the unit was powered on
CYCLES
= number of cycles since the last time the
unit was powered on
WARRANTY HOURS
= accumulated time while the
unit is powered on
WARRANTY CYCLES
= number of cycles over the
lifespan of the unit
Press the UP and DOWN arrows to scroll through the
Timers and Counters. The last screen provides an
option to reset the Run Time, Log Time and Cycles
counters. The Warranty Hours and Warranty Cycle
Counter cannot be reset.
Locking the Control Panel
1. Heater control panel lock-out – To prevent
unwanted adjusting or manipulating of the heater
settings, the control panel can be locked. Once
locked, if any button is pressed, the display will
read:
•
To activate the control panel lockout, press
the MENU SELECT and MODE buttons
simultaneously.
•
To unlock the control panel, press the MENU
SELECT and MODE buttons simultaneously.
HEATER
CONTROLS LOCKED
ENGLISH
