ALARMS AND ERRORS
If an error in valve or control function occurs, an alarm will sound and the Home screen will display the Error
Alert button and the Alarm button .
• Press the
Alarm
button to mute the alarm.
• Press the
Error Alert
button to view information about the error.
If the display is in sleep mode when an error occurs, the screen will turn on for five minutes. The error will beep for one second per
minute until the error is cleared. If the error is not cleared after five minutes, the screen will switch to power saving mode and display
the Error Alert button as a screen saver.
See TROUBLESHOOTING for more information about error conditions.
USB Connection for Field Programming
The XTR3 features a USB port that allows you to connect a device to the control for field programming and diagnostic parameter
download.
Notice
Field Programmer software is required for field programming features. See XTR3 Field Programmer Manual for more information on
using the Field Programmer software.
Pressing
on the Format screen displays the USB screen.
When the USB screen appears, connect a USB cable to the USB port on the control circuit board. Connect the other end of the USB
cable to a device with the Field Programmer software installed and follow the directions in the XTR3 Field Programmer manual to
complete the connection. Press
to return to Master Settings.
NOTE: Do not remove USB cable from computer or control while connected and transferring data. See the XTR3 Field Programmer
Error Alert
Alarm
56 •
PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
