TOUCHSCREEN SETUP CONTINUED
• Bluetooth
®
button should be turned on to open bluetooth signal during programming will automatically turn to off when
WiFi connected.
• Press
day override
to adjust the number of days since last regeneration in which a new regeneration will automatically be
run whether one is scheduled or not.
• Press
regen time
to adjust the time of day that an automatic regeneration cycle will begin.
• Press
hardness
to adjust the hardness setting. This value should match the hardness of the incoming untreated
water supply.
Changing the hardness setting recalculates treatment volume and regeneration interval. This setting should only be
changed on the advice of a professional.
• Press to save your changes or press to return to the Home screen.
Additional features may be accessed from the Settings screen by pressing the buttons at the bottom of the screen.
• Master Settings:
Displays the Master Settings screen, which allows you to fully program the valve.
• Brightness/Sound:
Displays the Brightness/Sound screen, which allows you to adjust the backlight of the control screen and
allows you to mute the alarms of the control.
Due to the complexity of these settings and the potential for errors, Master Settings should only be accessed by your local
water professional.
Settings can not be accessed during a regeneration. If a regeneration starts while in the settings menu, the screen will return
to the main screen and all parameters will be voided.
An Error Alert appears on the Home screen if an error condition is detected. Press the Error Alert button to view the
error message.
Most error alerts are cleared at regeneration. If the error persists following a regeneration, attempt the appropriate reset and
recovery procedure below or contact technical support.
Notice
Notice
Notice
Notice
Notice
ERROR ALERTS
18 •
PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
