When adding a filtration/softening system to homes/buildings supplied by well water, the system should be installed following
the pressure tank.
DO NOT USE this system for pneumatic or hydropneumatic applications. If you are using a booster pump,
then install this system following the booster pump.
If you have questions, please call customer service.
CAUTION
Homeowners
Phone: 877.842.1635
Technical Support
Phone: 800.861.8758
Customer Service Contact Information Section
IMPORTANT INFORMATION CONTINUED
PRODUCT OPERATION AND SPECIFICATIONS
Specification Description
Pentair IntelliWater Connected Water Softener
Minimum Working Pressure
20psi / 1.4 bar / 138 kpa
Maximum Working Pressure
125 psi/ 8.61 bar/ 861 kpa
Operating Temperature
35°F - 110°F/1°C-43°C
Operating Ambient Temperature
35°F - 120°F/1°C-52°C
Maximum Humidity
75%
Input Voltage
120 VAC
Input Frequency
50/60 Hz
Output Voltage
12 VDC
Output Current
2.0 amps
Maximum Altitude
2,000 meters
Installing this system in a metal (conductive) plumbing system, i.e., copper or galvanized metal, will interrupt the continuity of the
plumbing system and grounding source in some homes. If your home’s electrical appliances are grounded through the plumbing
system, you will need to install a bypass that consists of the same material as the existing plumbing or a grounded “jumper wire”
to bridge the equipment and re-establish the contiguous conductive nature of the plumbing before using this Pentair system.
Failure to do so can result in errant electricity from improperly grounded appliances or potential galvanic activity in the plumbing
system, which could increase the risk of fire or injury while using your home appliances. Please consult a licensed electrician
before attempting to install.
WARNING
PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
• 3
