TOUCHSCREEN CONTROL FEATURES CONTINUED
Vacation Mode:
Halts all scheduled regenerations when pressed; press again to resume normal operation.
When Vacation Mode is on, the 100 day regeneration error will be suspended
Assistance:
Displays a name and phone number to call for unit service.
USB Connect:
Allows you to connect the control to a device via a USB cable for field programming or download of diagnostic
parameters via device (Field Programmer application required).
Screen Navigation Arrows:
Displayed in the upper-left and upper-right corners of the screen, these arrows allow
you to navigate from one screen to another.
Settings on previous screen are not saved unless is pressed.
Settings Arrows:
These arrows allow you to change the values of certain settings when programming the control.
Alarm:
Displayed when an alarm has been triggered; accompanied by an audible alarm. Press to silence the
audible alarm.
Error:
Displayed when an error has occurred. Press to display the Error screen for more detailed error information.
Advance:
This arrow allows you to advance through cycle steps during a regeneration.
Reset:
Displayed in the Diagnostics screen to reset Totalizer and Peak Flow data and in Master Settings to reset
parameters to factory or non-factory settings.
Accept:
Press to save or accept changes in control configuration.
Cancel:
Press to cancel configuration and exit to previous screen without saving.
Alert:
Will display when there is no internet connection.
WIFI:
Represents signal strength to WiFi router.
Bluetooth:
When displayed in black, Bluetooth
®
signal is open. When displayed in white, bluetooth connection
is engaged.
Notice
PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
• 13
