TOUCHSCREEN SETUP
The XTR3 control was designed to be easy to set up and begin using right out of the box. The following simple procedure can be
used to set up the system and begin treating water in most typical applications.
Notice
Steps 2 and 3 are optional and are not required to start the system. All control settings may be changed after the unit is
in service.
Notice
Press on any Quick Start screen to reset the screen back to its default settings.
1. After plugging in the unit, the Format screen (Figure 9) is displayed.
Press the
language
button to adjust the system's displayed language (international version only): English, French, German, Italian,
Spanish, or Dutch. Press
when finished.
Press the
units
button to adjust the system's units of measure (either U.S. or metric). Press
when finished.
Press the
hardness units
button to adjust the system's hardness units of measure (grains per gallon, mg/L or ppm, German degrees,
French degrees, or English degrees). Press
when finished. Hardness units are adjustable only if metric units are selected.
Figure 9
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
Notice
14 •
PENTAIR INTELLIWATER CONNECTED WATER SOFTENER
