Pentair FLECK 9000 SXT, Руководство по установке

Страница: 50 / 118

Installer manual Fleck 9000 SXT - Programming
50 / 118 Ref. MKT-IM-020 / C - 21.11.2019
Parameter Options Definition Note
RT Regeneration
time
00:00:00 to
23:59:59
Hour Regeneration time will not appear
unless regeneration day override is
on.
H Feedwater
hardness
1 to 1990 °TH, ppm or
grains
Only displayed for volumetric
regenerations.
RC Fixed reserve
capacity
0 to 50 % Only displayed for volumetric
regenerations and if set in reserve
selection.
SF Safety factor 0 to 50 % Only available if set in reserve
selection.
CD Current day 1 to 7 Day of the week -
6.4.2 Day of override (DO)
1. Press and simultaneously for 5 seconds to enter the
menus sequence.
2. Select the number of days of override with and .
3. Press to validate the selection and advance to the next
parameter.
6.4.3 Regeneration time (RT)
Determine the time of regeneration.
1. Adjust the regeneration time with and .
2. Press to validate the selection and advance to the next
parameter.
6.4.4 Feed water hardness (H)
1. Adjust the water hardness with and .
2. Press to validate the selection and advance to the next
parameter.
6.4.5 Reserve capacity (RC) or (SF)
Determine the reserve capacity in litre or in percentage.
1. Adjust the reserve capacity with and .
2. Press to validate the selection and advance to the next
parameter.
6.4.6 Current day of the week (CD)
Determine the day of regeneration.