Pentair FLECK 9000 SXT, Руководство по установке

Страница: 59 / 118

Installer manual Fleck 9000 SXT - Programming
Ref. MKT-IM-020 / C - 21.11.2019 59 / 118
6.5.13 Regeneration cycle step duration
Set the duration in minutes of each regeneration cycle.
Info
Setting a cycle step to 0 will cause the controller to skip that step during regeneration,
but keeps the following steps available.
The different regeneration cycles are listed in sequence based on the regeneration
flow selected for the system.
All cycles can be set from 0 to 199 minutes.
6.5.13.1 Regeneration abbreviations
B1 First backwash BF Brine fill
B2 Second backwash BW Backwash
BD Brine draw RR Rapid rinse
6.5.13.2 For pre-set regeneration cycles
1. Press or to set the regeneration cycle time.
2. Press to validate the selection and move to the next
parameter.
3. Repeat the two previous steps for each cycle.
6.5.13.3 For regeneration flow Other
Info
The regeneration cycles are identified as R1 to R6.
1. Press or or to set the regeneration time of this cycle.
2. Press to validate the selection and move to the next
regeneration cycle.
3. Repeat the two previous steps for each cycle.