Pentair Fleck 5800 XTR, Руководство по установке

Страница: 69 / 126

Installer manual Fleck 5800 XTR - Programming
Ref. MKT-IM-006 / E - 12.11.2019 69 / 126
Info
Hardness units are adjustable only if metric units are selected.
Degree hardness units are converted to ppm upon input. Degree inputs may be rounded
up or down to the nearest ppm equivalent.
Press the screen navigation arrows at the upper-right and left of the screen to navigate to the
assistance name, assistance phone, and assistance interval screens. See Touchscreen controller
quick start [
} Page 53] for more information about these settings.
Press to save changes or press to return to the master setting screen without saving.
6.3.4 USB connection for field programming
The XTR features a USB port that allows you to connect a PC to the controller for field
programming and diagnostic parameter download.
Info
Field programmer software is required for field programming features. See XTR field
programmer manual for more information on using the field programmer software.
Do not remove USB cable from computer or controller while connected and
transferring.
From the format screen, press to access the USB screen.
USB
Connect the usb cable to the
control and PC and start
the field programming
application
When the USB screen appears, connect a USB cable to the USB port on the controller circuit
board (see Electrical connections [
} Page 45]Electrical connections [ } Page 45] for location of USB
port). Connect the other end of the USB cable to a PC with the field programmer software
installed and follow the directions in the XTR field programmer manual to complete the
connection.
Press to return to master settings.