Pentair Fleck 5800 XTR, Руководство по установке

Страница: 53 / 126

Installer manual Fleck 5800 XTR - Programming
Ref. MKT-IM-006 / E - 12.11.2019 53 / 126
6.2 Touchscreen controller quick start
Info
Press on any quick start screen to reset the screen back to its default settings,
excepted on the "Assistance interval" screen.
Steps Assistance name screen [ } Page 56] and Assistance phone screen [ } Page 56]
are optional and are not required to start the system. All controller settings may be
changed after the unit is in service.
If the screen is blank after plugging in the unit, touch the screen to turn the screen on.
6.2.1 Quick start setting reference chart
Info
The controller will discard any changes and exit master settings if any button is not
pressed for five minutes.
Screen name Parameters Values Notes
Format,
Format
Language English
French
German
Italian
Spanish
Dutch
Portuguese
Changes the language to display screen text
and button labels.
Units U.S.
Metric
Changes system units and values across all
parameters in the control.
All programmed units and values are
recalculated after adjusting this setting.
Hardness
units
Grain per gallon
mg/L or ppm
German degrees
French degrees
Clark degrees
Changes hardness units used in displaying
hardness parameters and calculating system
capacity and editing exchange capacity and
hardness settings.
Format,
Assistance
name
Free-form
text
A - Z and space Name of service provider to display when
viewing the assistance screen. 24 character
limit.
Format,
Assistance
phone
Free-form
text
0 - 9 and space Phone number of service provider to display
when viewing the assistance screen.
14 character limit.