2
Biffi
ICON 2000 / ICON 2000 AD
Addendum A to InstructIon And operAtIng mAnuAl
2.1 MArking
IECEx INE XX�ZZZZ
IECEx reference certificate (CoC)
XX ATEX ZZZZ
ATEX reference certificate
0080
Notified body for ATEX quality assurance (INERIS)
II
Group II (surface industries)
2
Category 2 apparatus
G
Explosive atmospheres caused by gas, mists or vapors
D
Explosive atmospheres caused by gas dusts
IP66/68
Degree of protection
2� CHECk fOR RIGHT
APPlICATION
WArning
Before the installation it is mandatory to check
if the nameplate associated to the extension for
additional entry specifies the appropriate degree
of protection and ambient temperature limits as
requested by the rules applicable to the plant/
location where units are installed. Template of the
label is attached here below.
Installation in ambient with the presence
of explosive atmosphere not covered by the
specified grade of protection, or which could
reach temperature higher than the maximum
specified on the label, will invalidate the safety
and the warranty�
Template of the label for ICON 2000 / ICON 2000 AD
Hazardous zone
Zone
Categories according to 94/9/eC directive
Gas, mist or vapors
0
1G
Gas, mists or vapors
1
2G or 1G
Gas, mists or vapors
2
3G or 2G or 1G
Dust
20
1D
Dust
21
2D or 1D
Dust
22
3D or 2D or 1D
3� APPlICABlE GENERAl
STANDARDS AND
REGulATIONS
equipMenT proTeCTion leVel (epl) en 60079-14
explosive atmosphere
Zone
epl
Gas
0
Ga
Gas
1
Ga or Gb
Gas
2
Ga or Gb or Gc
Dust
20
Da
Dust
21
Da or Db
Dust
22
Da or Db or Dc
2006/42/EC
Machinery Directive
2004/108/EC
EMC Directive
2006/95/EC
low Voltage Directive
94/9/EC
ATEX Directive
EN ISO 12100-1
Safety of machinery -
Basic concepts, general
principles for design�
Part 1-Basic terminology,
methodology
EN ISO 12100-2
Safety of machinery -
Basic concepts, general
principles for design�
Part 2-Technical principles
and specification
EN 60079-0: 2009
IEC 60079-0: 2011
EN 60079-1: 2007
IEC 60079-1: 2007
EN 60079-7: 2007
IEC 60079-7: 2006
EN 60079-11: 2012 IEC 60079-11: 2011
EN 60079-31: 2009 IEC 60079-31: 2008
EN 13463-1: 2009
EN 13463-5: 2003
4� TERMS AND CONDITIONS
Biffi guarantees each single product to be free
from defects and to conform to current goods
specifications� The warranty period is one year
from the date of installation by the first user,
or eighteen months from the date of shipment
to the first user, whichever occurs first� No
warranty is given for products or components
manufactured by third-party companies, or
for goods which have been subject to misuse,
improper installation, corrosion, or which have
been modified or repaired by unauthorized
personnel� Repair work due to improper use
will be charged at standard rates�
5� MANufACTuRER’S
lIABIlITy
Biffi Italia declines all liability in the event of:
- use of product in contravention of local safety
at work legislation�
- Incorrect installation, disregard or incorrect
application of the instructions provided on
the product nameplate and in VCIOM-01232
main Instruction and Operating Manual and
relevant Addendum A�
- Modification of the product without Biffi’s
authorization�
- Work done on the product by unqualified or
unsuitable personnel�
